// Sources flattened with hardhat v2.1.2 https://hardhat.org // File @openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol@v4.0.0 // SPDX-License-Identifier: MIT pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20Upgradeable { /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `recipient`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address recipient, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `sender` to `recipient` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom(address sender, address recipient, uint256 amount) external returns (bool); /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); } // File @openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol@v4.0.0 // SPDX-License-Identifier: MIT // pragma solidity ^0.8.0; /** * @dev Collection of functions related to the address type */ library AddressUpgradeable { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize, which returns 0 for contracts in // construction, since the code is only stored at the end of the // constructor execution. uint256 size; // solhint-disable-next-line no-inline-assembly assembly { size := extcodesize(account) } return size > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); // solhint-disable-next-line avoid-low-level-calls, avoid-call-value (bool success, ) = recipient.call{ value: amount }(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain`call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCall(target, data, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); require(isContract(target), "Address: call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.call{ value: value }(data); return _verifyCallResult(success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) { require(isContract(target), "Address: static call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.staticcall(data); return _verifyCallResult(success, returndata, errorMessage); } function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) { if (success) { return returndata; } else { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly // solhint-disable-next-line no-inline-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } } } // File @openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol@v4.0.0 // SPDX-License-Identifier: MIT // solhint-disable-next-line compiler-version // pragma solidity ^0.8.0; /** * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed * behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect. * * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as * possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}. * * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity. */ abstract contract Initializable { /** * @dev Indicates that the contract has been initialized. */ bool private _initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private _initializing; /** * @dev Modifier to protect an initializer function from being invoked twice. */ modifier initializer() { require(_initializing || !_initialized, "Initializable: contract is already initialized"); bool isTopLevelCall = !_initializing; if (isTopLevelCall) { _initializing = true; _initialized = true; } _; if (isTopLevelCall) { _initializing = false; } } } // File @openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol@v4.0.0 // SPDX-License-Identifier: MIT // pragma solidity ^0.8.0; /* * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract ContextUpgradeable is Initializable { function __Context_init() internal initializer { __Context_init_unchained(); } function __Context_init_unchained() internal initializer { } function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } uint256[50] private __gap; } // File @openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol@v4.0.0 // SPDX-License-Identifier: MIT // pragma solidity ^0.8.0; /** * @dev Implementation of the {IERC20} interface. * * This implementation is agnostic to the way tokens are created. This means * that a supply mechanism has to be added in a derived contract using {_mint}. * For a generic mechanism see {ERC20PresetMinterPauser}. * * TIP: For a detailed writeup see our guide * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How * to implement supply mechanisms]. * * We have followed general OpenZeppelin guidelines: functions revert instead * of returning `false` on failure. This behavior is nonetheless conventional * and does not conflict with the expectations of ERC20 applications. * * Additionally, an {Approval} event is emitted on calls to {transferFrom}. * This allows applications to reconstruct the allowance for all accounts just * by listening to said events. Other implementations of the EIP may not emit * these events, as it isn't required by the specification. * * Finally, the non-standard {decreaseAllowance} and {increaseAllowance} * functions have been added to mitigate the well-known issues around setting * allowances. See {IERC20-approve}. */ contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable { mapping (address => uint256) private _balances; mapping (address => mapping (address => uint256)) private _allowances; uint256 private _totalSupply; string private _name; string private _symbol; /** * @dev Sets the values for {name} and {symbol}. * * The defaut value of {decimals} is 18. To select a different value for * {decimals} you should overload it. * * All three of these values are immutable: they can only be set once during * construction. */ function __ERC20_init(string memory name_, string memory symbol_) internal initializer { __Context_init_unchained(); __ERC20_init_unchained(name_, symbol_); } function __ERC20_init_unchained(string memory name_, string memory symbol_) internal initializer { _name = name_; _symbol = symbol_; } /** * @dev Returns the name of the token. */ function name() public view virtual returns (string memory) { return _name; } /** * @dev Returns the symbol of the token, usually a shorter version of the * name. */ function symbol() public view virtual returns (string memory) { return _symbol; } /** * @dev Returns the number of decimals used to get its user representation. * For example, if `decimals` equals `2`, a balance of `505` tokens should * be displayed to a user as `5,05` (`505 / 10 ** 2`). * * Tokens usually opt for a value of 18, imitating the relationship between * Ether and Wei. This is the value {ERC20} uses, unless this function is * overloaded; * * NOTE: This information is only used for _display_ purposes: it in * no way affects any of the arithmetic of the contract, including * {IERC20-balanceOf} and {IERC20-transfer}. */ function decimals() public view virtual returns (uint8) { return 18; } /** * @dev See {IERC20-totalSupply}. */ function totalSupply() public view virtual override returns (uint256) { return _totalSupply; } /** * @dev See {IERC20-balanceOf}. */ function balanceOf(address account) public view virtual override returns (uint256) { return _balances[account]; } /** * @dev See {IERC20-transfer}. * * Requirements: * * - `recipient` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address recipient, uint256 amount) public virtual override returns (bool) { _transfer(_msgSender(), recipient, amount); return true; } /** * @dev See {IERC20-allowance}. */ function allowance(address owner, address spender) public view virtual override returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {IERC20-approve}. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) public virtual override returns (bool) { _approve(_msgSender(), spender, amount); return true; } /** * @dev See {IERC20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {ERC20}. * * Requirements: * * - `sender` and `recipient` cannot be the zero address. * - `sender` must have a balance of at least `amount`. * - the caller must have allowance for ``sender``'s tokens of at least * `amount`. */ function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) { _transfer(sender, recipient, amount); uint256 currentAllowance = _allowances[sender][_msgSender()]; require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance"); _approve(sender, _msgSender(), currentAllowance - amount); return true; } /** * @dev Atomically increases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. */ function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) { _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue); return true; } /** * @dev Atomically decreases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. * - `spender` must have allowance for the caller of at least * `subtractedValue`. */ function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) { uint256 currentAllowance = _allowances[_msgSender()][spender]; require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero"); _approve(_msgSender(), spender, currentAllowance - subtractedValue); return true; } /** * @dev Moves tokens `amount` from `sender` to `recipient`. * * This is internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `sender` cannot be the zero address. * - `recipient` cannot be the zero address. * - `sender` must have a balance of at least `amount`. */ function _transfer(address sender, address recipient, uint256 amount) internal virtual { require(sender != address(0), "ERC20: transfer from the zero address"); require(recipient != address(0), "ERC20: transfer to the zero address"); _beforeTokenTransfer(sender, recipient, amount); uint256 senderBalance = _balances[sender]; require(senderBalance >= amount, "ERC20: transfer amount exceeds balance"); _balances[sender] = senderBalance - amount; _balances[recipient] += amount; emit Transfer(sender, recipient, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements: * * - `to` cannot be the zero address. */ function _mint(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: mint to the zero address"); _beforeTokenTransfer(address(0), account, amount); _totalSupply += amount; _balances[account] += amount; emit Transfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: burn from the zero address"); _beforeTokenTransfer(account, address(0), amount); uint256 accountBalance = _balances[account]; require(accountBalance >= amount, "ERC20: burn amount exceeds balance"); _balances[account] = accountBalance - amount; _totalSupply -= amount; emit Transfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens. * * This internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve(address owner, address spender, uint256 amount) internal virtual { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Hook that is called before any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * will be to transferred to `to`. * - when `from` is zero, `amount` tokens will be minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { } uint256[45] private __gap; } // File @openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol@v4.0.0 // SPDX-License-Identifier: MIT // pragma solidity ^0.8.0; /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable { address private _owner; event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the deployer as the initial owner. */ function __Ownable_init() internal initializer { __Context_init_unchained(); __Ownable_init_unchained(); } function __Ownable_init_unchained() internal initializer { address msgSender = _msgSender(); _owner = msgSender; emit OwnershipTransferred(address(0), msgSender); } /** * @dev Returns the address of the current owner. */ function owner() public view virtual returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(owner() == _msgSender(), "Ownable: caller is not the owner"); _; } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require(newOwner != address(0), "Ownable: new owner is the zero address"); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } uint256[49] private __gap; } // File @openzeppelin/contracts-upgradeable/utils/math/SafeMathUpgradeable.sol@v4.0.0 // SPDX-License-Identifier: MIT // pragma solidity ^0.8.0; // CAUTION // This version of SafeMath should only be used with Solidity 0.8 or later, // because it relies on the compiler's built in overflow checks. /** * @dev Wrappers over Solidity's arithmetic operations. * * NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler * now has built in overflow checking. */ library SafeMathUpgradeable { /** * @dev Returns the addition of two unsigned integers, with an overflow flag. * * _Available since v3.4._ */ function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) { unchecked { uint256 c = a + b; if (c < a) return (false, 0); return (true, c); } } /** * @dev Returns the substraction of two unsigned integers, with an overflow flag. * * _Available since v3.4._ */ function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) { unchecked { if (b > a) return (false, 0); return (true, a - b); } } /** * @dev Returns the multiplication of two unsigned integers, with an overflow flag. * * _Available since v3.4._ */ function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) { unchecked { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) return (true, 0); uint256 c = a * b; if (c / a != b) return (false, 0); return (true, c); } } /** * @dev Returns the division of two unsigned integers, with a division by zero flag. * * _Available since v3.4._ */ function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) { unchecked { if (b == 0) return (false, 0); return (true, a / b); } } /** * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag. * * _Available since v3.4._ */ function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) { unchecked { if (b == 0) return (false, 0); return (true, a % b); } } /** * @dev Returns the addition of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `+` operator. * * Requirements: * * - Addition cannot overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { return a + b; } /** * @dev Returns the subtraction of two unsigned integers, reverting on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { return a - b; } /** * @dev Returns the multiplication of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `*` operator. * * Requirements: * * - Multiplication cannot overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { return a * b; } /** * @dev Returns the integer division of two unsigned integers, reverting on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { return a / b; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * reverting when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { return a % b; } /** * @dev Returns the subtraction of two unsigned integers, reverting with custom message on * overflow (when the result is negative). * * CAUTION: This function is deprecated because it requires allocating memory for the error * message unnecessarily. For custom revert reasons use {trySub}. * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { unchecked { require(b <= a, errorMessage); return a - b; } } /** * @dev Returns the integer division of two unsigned integers, reverting with custom message on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { unchecked { require(b > 0, errorMessage); return a / b; } } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * reverting with custom message when dividing by zero. * * CAUTION: This function is deprecated because it requires allocating memory for the error * message unnecessarily. For custom revert reasons use {tryMod}. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { unchecked { require(b > 0, errorMessage); return a % b; } } } // File contracts/interfaces/IUniswapV2Pair.sol // SPDX-License-Identifier: MIT // pragma solidity ^0.8.0; interface IUniswapV2Pair { event Approval(address indexed owner, address indexed spender, uint value); event Transfer(address indexed from, address indexed to, uint value); function name() external pure returns (string memory); function symbol() external pure returns (string memory); function decimals() external pure returns (uint8); function totalSupply() external view returns (uint); function balanceOf(address owner) external view returns (uint); function allowance(address owner, address spender) external view returns (uint); function approve(address spender, uint value) external returns (bool); function transfer(address to, uint value) external returns (bool); function transferFrom(address from, address to, uint value) external returns (bool); function DOMAIN_SEPARATOR() external view returns (bytes32); function PERMIT_TYPEHASH() external pure returns (bytes32); function nonces(address owner) external view returns (uint); function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external; event Mint(address indexed sender, uint amount0, uint amount1); event Burn(address indexed sender, uint amount0, uint amount1, address indexed to); event Swap( address indexed sender, uint amount0In, uint amount1In, uint amount0Out, uint amount1Out, address indexed to ); event Sync(uint112 reserve0, uint112 reserve1); function MINIMUM_LIQUIDITY() external pure returns (uint); function factory() external view returns (address); function token0() external view returns (address); function token1() external view returns (address); function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast); function price0CumulativeLast() external view returns (uint); function price1CumulativeLast() external view returns (uint); function kLast() external view returns (uint); function mint(address to) external returns (uint liquidity); function burn(address to) external returns (uint amount0, uint amount1); function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external; function skim(address to) external; function sync() external; function initialize(address, address) external; } // File contracts/interfaces/IUniswapV2Router01.sol // SPDX-License-Identifier: MIT // pragma solidity ^0.8.0; interface IUniswapV2Router01 { function factory() external pure returns (address); function WETH() external pure returns (address); function addLiquidity( address tokenA, address tokenB, uint amountADesired, uint amountBDesired, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB, uint liquidity); function addLiquidityETH( address token, uint amountTokenDesired, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external payable returns (uint amountToken, uint amountETH, uint liquidity); function removeLiquidity( address tokenA, address tokenB, uint liquidity, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB); function removeLiquidityETH( address token, uint liquidity, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external returns (uint amountToken, uint amountETH); function removeLiquidityWithPermit( address tokenA, address tokenB, uint liquidity, uint amountAMin, uint amountBMin, address to, uint deadline, bool approveMax, uint8 v, bytes32 r, bytes32 s ) external returns (uint amountA, uint amountB); function removeLiquidityETHWithPermit( address token, uint liquidity, uint amountTokenMin, uint amountETHMin, address to, uint deadline, bool approveMax, uint8 v, bytes32 r, bytes32 s ) external returns (uint amountToken, uint amountETH); function swapExactTokensForTokens( uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline ) external returns (uint[] memory amounts); function swapTokensForExactTokens( uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline ) external returns (uint[] memory amounts); function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline) external payable returns (uint[] memory amounts); function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline) external returns (uint[] memory amounts); function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline) external returns (uint[] memory amounts); function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline) external payable returns (uint[] memory amounts); function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB); function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut); function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn); function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts); function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts); } // File contracts/interfaces/IUniswapV2Router02.sol // SPDX-License-Identifier: MIT // pragma solidity ^0.8.0; interface IUniswapV2Router02 is IUniswapV2Router01 { function removeLiquidityETHSupportingFeeOnTransferTokens( address token, uint liquidity, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external returns (uint amountETH); function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens( address token, uint liquidity, uint amountTokenMin, uint amountETHMin, address to, uint deadline, bool approveMax, uint8 v, bytes32 r, bytes32 s ) external returns (uint amountETH); function swapExactTokensForTokensSupportingFeeOnTransferTokens( uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline ) external; function swapExactETHForTokensSupportingFeeOnTransferTokens( uint amountOutMin, address[] calldata path, address to, uint deadline ) external payable; function swapExactTokensForETHSupportingFeeOnTransferTokens( uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline ) external; } // File contracts/interfaces/IUniswapV2Factory.sol // SPDX-License-Identifier: MIT // pragma solidity ^0.8.0; interface IUniswapV2Factory { event PairCreated(address indexed token0, address indexed token1, address pair, uint); function feeTo() external view returns (address); function feeToSetter() external view returns (address); function getPair(address tokenA, address tokenB) external view returns (address pair); function allPairs(uint) external view returns (address pair); function allPairsLength() external view returns (uint); function createPair(address tokenA, address tokenB) external returns (address pair); function setFeeTo(address) external; function setFeeToSetter(address) external; } // File contracts/ReChain.sol // SPDX-License-Identifier: MIT // pragma solidity ^0.8.0; contract ReChain is Initializable, ERC20Upgradeable, OwnableUpgradeable { using SafeMathUpgradeable for uint256; using AddressUpgradeable for address; mapping (address => uint256) private _rOwned; mapping (address => uint256) private _tOwned; mapping (address => mapping (address => uint256)) private _allowances; mapping (address => bool) private _isExcluded; mapping (address => bool) private _isIncludedForReinvigoration; mapping (address => bool) private _isIncludedForLiquidity; address[] private _excluded; address[] private _includedReinvigoration; address[] private _includedLiquidity; uint256 private constant MAX = ~uint256(0); uint256 private _tTotal; uint256 private _rTotal; uint256 private _tLiquidity; uint256 private _tFeeTotal; uint256 private _tReinvigorationTotal; uint256 private _totalSupply; string private _name; string private _symbol; uint8 private _decimals; uint256 private _taxFee; uint256 private _tLiquidityFee; uint256 private _tReinvigorationFee; uint256 private _maxTxAmount; // For Uniswap and other variables mapping (address => bool) private _isExcludedFromFee; uint256 private numTokensSellToAddToLiquidity; uint256 private _previousTaxFee; uint256 private _previousLiquidityFee; uint256 private _previousReinvigorationFee; address private _reinvigorationAddress; // UniSwap Interface IUniswapV2Router02 public uniswapV2Router; address public uniswapV2Pair; bool inSwapAndLiquify; bool public swapAndLiquifyEnabled; event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap); event SwapAndLiquifyEnabledUpdated(bool enabled); event SwapAndLiquify(uint256 tokensSwapped, uint256 ethReceived, uint256 tokensIntoLiqudity); modifier lockTheSwap { inSwapAndLiquify = true; _; inSwapAndLiquify = false; } function initialize(string memory name, string memory symbol, uint256 initialSupply) public virtual initializer { __ERC20_init(name, symbol); __Ownable_init(); _totalSupply = initialSupply; _decimals = 9; _tTotal = _totalSupply; _rTotal = (MAX - (MAX % _tTotal)); _name = name; _symbol = symbol; _taxFee = 2; _tLiquidityFee = 6; _tReinvigorationFee = 2; _maxTxAmount = _totalSupply; _rOwned[_msgSender()] = _rTotal; // UniSwap and other variables numTokensSellToAddToLiquidity = 100000000000000000000; _previousTaxFee = _taxFee; _previousLiquidityFee = _tLiquidityFee; _previousReinvigorationFee = _tReinvigorationFee; // exclude owner and this contract from fee _isExcludedFromFee[owner()] = true; _isExcludedFromFee[address(this)] = true; // Known UniSwap Router // https://bscscan.com/address/0x05ff2b0db69458a0750badebc4f9e13add608c7f IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x05fF2B0DB69458A0750badebc4f9e13aDd608C7F); uniswapV2Router = _uniswapV2Router; // Swap Functionality swapAndLiquifyEnabled = true; emit Transfer(address(0), _msgSender(), _tTotal); } function startSwapFunctionality() public onlyOwner { require(uniswapV2Pair == address(0), "Pair already generated"); // BSC MainNet, Pancakeswap Router uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory()).createPair(address(this), uniswapV2Router.WETH()); } function isExcluded(address account) public view returns(bool) { return _isExcluded[account]; } function decimals() public view override returns (uint8) { return _decimals; } function balanceOf(address account) public view override returns (uint256) { if (_isExcluded[account]) return _tOwned[account]; return tokenFromReflection(_rOwned[account]); } function totalFees() public view returns (uint256) { return _tFeeTotal; } function totalSupply() public view override returns (uint256) { return _tTotal; } function totalLiquidity() public view returns (uint256) { return _tLiquidity; } function totalReinvigoration() public view returns (uint256) { return _tReinvigorationTotal; } function deliver(uint256 tAmount) public { address sender = _msgSender(); require(!_isExcluded[sender], "Excluded addresses cannot call this function"); require(!_isIncludedForReinvigoration[sender], "Reinvigoration addresses cannot call this function"); (uint256 rAmount,,,,,,) = _getValues(tAmount); _rOwned[sender] = _rOwned[sender].sub(rAmount); _rTotal = _rTotal.sub(rAmount); _tFeeTotal = _tFeeTotal.add(tAmount); } function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) { require(tAmount <= _tTotal, "Amount must be less than supply"); if (!deductTransferFee) { (uint256 rAmount,,,,,,) = _getValues(tAmount); return rAmount; } else { (,uint256 rTransferAmount,,,,,) = _getValues(tAmount); return rTransferAmount; } } function tokenFromReflection(uint256 rAmount) public view returns(uint256) { require(rAmount <= _rTotal, "Amount must be less than total reflections"); uint256 currentRate = _getRate(); return rAmount.div(currentRate); } function excludeAccount(address account) external onlyOwner() { require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.'); require(!_isExcluded[account], "Account is already excluded"); if(_rOwned[account] > 0) { _tOwned[account] = tokenFromReflection(_rOwned[account]); } _isExcluded[account] = true; _excluded.push(account); } function includeAccount(address account) external onlyOwner() { require(_isExcluded[account], "Account is already excluded"); for (uint256 i = 0; i < _excluded.length; i++) { if (_excluded[i] == account) { _excluded[i] = _excluded[_excluded.length - 1]; _isExcluded[account] = false; _excluded.pop(); break; } } } function _transferToken(address sender, address recipient, uint256 amount, bool takeFee) private { if(!takeFee) removeAllFee(); if (_isExcluded[sender] && !_isExcluded[recipient]) { _transferFromExcluded(sender, recipient, amount); } else if (!_isExcluded[sender] && _isExcluded[recipient]) { _transferToExcluded(sender, recipient, amount); } else if (!_isExcluded[sender] && !_isExcluded[recipient]) { _transferStandard(sender, recipient, amount); } else if (_isExcluded[sender] && _isExcluded[recipient]) { _transferBothExcluded(sender, recipient, amount); } else { _transferStandard(sender, recipient, amount); } if(!takeFee) restoreAllFee(); } function _transfer(address sender, address recipient, uint256 amount) internal override { require(sender != address(0), "ERC20: transfer from the zero address"); require(recipient != address(0), "ERC20: transfer to the zero address"); require(amount > 0, "Transfer amount must be greater than zero"); if(sender != owner() && recipient != owner()) require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount."); uint256 contractTokenBalance = balanceOf(address(this)); if(contractTokenBalance >= _maxTxAmount) { contractTokenBalance = _maxTxAmount; } bool overMinTokenBalance = contractTokenBalance >= numTokensSellToAddToLiquidity; if ( overMinTokenBalance && !inSwapAndLiquify && sender != uniswapV2Pair && swapAndLiquifyEnabled ) { contractTokenBalance = numTokensSellToAddToLiquidity; //add liquidity swapAndLiquify(contractTokenBalance); } //indicates if fee should be deducted from transfer bool takeFee = true; //if any account belongs to _isExcludedFromFee account then remove the fee if(_isExcludedFromFee[sender] || _isExcludedFromFee[recipient]){ takeFee = false; } _transferToken(sender, recipient, amount, takeFee); } function _transferStandard(address sender, address recipient, uint256 tAmount) private { (uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity, uint256 tReinvigoration) = _getValues(tAmount); _rOwned[sender] = _rOwned[sender].sub(rAmount); _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount); _reflectLiquidity(tLiquidity); _reflectFee(rFee, tFee); _reflectReinvigoration(tReinvigoration); emit Transfer(sender, recipient, tTransferAmount); } function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap { // split the contract balance into halves uint256 half = contractTokenBalance.div(2); uint256 otherHalf = contractTokenBalance.sub(half); // capture the contract's current ETH balance. // this is so that we can capture exactly the amount of ETH that the // swap creates, and not make the liquidity event include any ETH that // has been manually sent to the contract uint256 initialBalance = address(this).balance; // swap tokens for ETH swapTokensForEth(half); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered // how much ETH did we just swap into? uint256 newBalance = address(this).balance.sub(initialBalance); // add liquidity to uniswap addLiquidity(otherHalf, newBalance); emit SwapAndLiquify(half, newBalance, otherHalf); } function swapTokensForEth(uint256 tokenAmount) private { // generate the pancakeswap pair path of token -> wbnb address[] memory path = new address[](2); path[0] = address(this); path[1] = uniswapV2Router.WETH(); _approve(address(this), address(uniswapV2Router), tokenAmount); // make the swap uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens( tokenAmount, 0, // accept any amount of BNB path, address(this), block.timestamp ); } function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private { // approve token transfer to cover all possible scenarios _approve(address(this), address(uniswapV2Router), tokenAmount); // add the liquidity uniswapV2Router.addLiquidityETH{value: ethAmount}( address(this), tokenAmount, 0, // slippage is unavoidable 0, // slippage is unavoidable owner(), block.timestamp ); // Update liquidity total _tLiquidity = _tLiquidity.add(tokenAmount); } function _transferToExcluded(address sender, address recipient, uint256 tAmount) private { (uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity, uint256 tReinvigoration) = _getValues(tAmount); _rOwned[sender] = _rOwned[sender].sub(rAmount); _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount); _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount); _reflectLiquidity(tLiquidity); _reflectFee(rFee, tFee); _reflectReinvigoration(tReinvigoration); emit Transfer(sender, recipient, tTransferAmount); } function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private { (uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity, uint256 tReinvigoration) = _getValues(tAmount); _tOwned[sender] = _tOwned[sender].sub(tAmount); _rOwned[sender] = _rOwned[sender].sub(rAmount); _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount); _reflectLiquidity(tLiquidity); _reflectFee(rFee, tFee); _reflectReinvigoration(tReinvigoration); emit Transfer(sender, recipient, tTransferAmount); } function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private { (uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity, uint256 tReinvigoration) = _getValues(tAmount); _tOwned[sender] = _tOwned[sender].sub(tAmount); _rOwned[sender] = _rOwned[sender].sub(rAmount); _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount); _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount); _reflectLiquidity(tLiquidity); _reflectFee(rFee, tFee); _reflectReinvigoration(tReinvigoration); emit Transfer(sender, recipient, tTransferAmount); } function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner { swapAndLiquifyEnabled = _enabled; emit SwapAndLiquifyEnabledUpdated(_enabled); } // Receieve BNB from uniswapV2Router when swaping receive() external payable {} function _reflectLiquidity(uint256 tLiquidity) private { uint256 currentRate = _getRate(); uint256 rLiquidity = tLiquidity.mul(currentRate); _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity); if(_isExcluded[address(this)]) _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity); } function _reflectFee(uint256 rFee, uint256 tFee) private { _rTotal = _rTotal.sub(rFee); _tFeeTotal = _tFeeTotal.add(tFee); } function _reflectReinvigoration(uint256 tReinvigoration) private { // Transfers to the only allowed address for reinvigoration uint256 currentRate = _getRate(); uint256 rReinvigoration = tReinvigoration.mul(currentRate); // send to specific reinvigoration address _rOwned[_reinvigorationAddress] = _rOwned[_reinvigorationAddress].add(rReinvigoration); } function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256, uint256) { (uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity, uint256 tReinvigoration) = _getTValues(tAmount); (uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, tReinvigoration, _getRate()); return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLiquidity, tReinvigoration); } function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256) { uint256 tFee = calculateTaxFee(tAmount); uint256 tLiquidity = calculateLiquidityFee(tAmount); uint256 tReinvigoration = calculateReinvigorationFee(tAmount); uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity).sub(tReinvigoration); return (tTransferAmount, tFee, tLiquidity, tReinvigoration); } function _getRValues(uint256 tAmount, uint256 tFee, uint256 tLiquidity, uint256 tReinvigoration, uint256 currentRate) private pure returns (uint256, uint256, uint256) { uint256 rAmount = tAmount.mul(currentRate); uint256 rFee = tFee.mul(currentRate); uint256 rLiquidity = tLiquidity.mul(currentRate); uint256 rReinvigoration = tReinvigoration.mul(currentRate); uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity).sub(rReinvigoration); return (rAmount, rTransferAmount, rFee); } function _getRate() private view returns(uint256) { (uint256 rSupply, uint256 tSupply) = _getCurrentSupply(); return rSupply.div(tSupply); } function _getCurrentSupply() private view returns(uint256, uint256) { uint256 rSupply = _rTotal; uint256 tSupply = _tTotal; for (uint256 i = 0; i < _excluded.length; i++) { if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal); rSupply = rSupply.sub(_rOwned[_excluded[i]]); tSupply = tSupply.sub(_tOwned[_excluded[i]]); } if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal); return (rSupply, tSupply); } function calculateTaxFee(uint256 _amount) private view returns (uint256) { return _amount.mul(_taxFee).div(10**2); } function calculateLiquidityFee(uint256 _amount) private view returns (uint256) { return _amount.mul(_tLiquidityFee).div(10**2); } function calculateReinvigorationFee(uint256 _amount) private view returns (uint256) { return _amount.mul(_tReinvigorationFee).div(10**2); } function removeAllFee() private { if(_taxFee == 0 && _tLiquidityFee == 0 && _tReinvigorationFee == 0) return; _previousTaxFee = _taxFee; _previousLiquidityFee = _tLiquidityFee; _previousReinvigorationFee = _tReinvigorationFee; _taxFee = 0; _tLiquidityFee = 0; _tReinvigorationFee = 0; } function restoreAllFee() private { _taxFee = _previousTaxFee; _tLiquidityFee = _previousLiquidityFee; _tReinvigorationFee = _previousReinvigorationFee; } function getTaxFee() public view returns(uint256) { return _taxFee; } function getLiquidityFee() public view returns(uint256) { return _tLiquidityFee; } function getReinvigorationFee() public view returns(uint256) { return _tReinvigorationFee; } function _getMaxTxAmount() private view returns(uint256) { return _maxTxAmount; } function _setTaxFee(uint256 taxFee) external onlyOwner() { require(taxFee >= 1 && taxFee <= 10, 'taxFee should be in 1 - 10'); _taxFee = taxFee; } function _setReinvigorationFee(uint256 reinvigorationFee) external onlyOwner() { require(reinvigorationFee >= 1 && reinvigorationFee <= 10, 'reinvigorationFee should be in 1 - 10'); _tReinvigorationFee = reinvigorationFee; } function _setLiquidityFee(uint256 liquidityFee) external onlyOwner() { require(liquidityFee >= 1 && liquidityFee <= 10, 'liquidityFee should be in 1 - 10'); _tLiquidityFee = liquidityFee; } function excludeFromFee(address account) public onlyOwner { _isExcludedFromFee[account] = true; } function includeInFee(address account) public onlyOwner { _isExcludedFromFee[account] = false; } function setReinvigorationAddress(address account) public onlyOwner { require(_reinvigorationAddress != account, "Account is already set"); _reinvigorationAddress = account; } }